Title Bar

Uniden 436 Reciving issue

General discussion about scanners, antennas, coax, how things work, and any other radio related discussion.

Uniden 436 Reciving issue

Postby k3fs » Fri Oct 27, 2017 5:41 pm

There has been some confirmation on the Yahoo Scanner Radio Discussion for DFW regarding the 436 reception issue.

Start quoted text :

Paul Opitz
Oct 15 9:18 AM
Blaine: One version of the main board had a noise issue that caused poor VHF/UHF performance. One way to see if this is the case is to just put a remote antenna on the scanner. If VHF/UHF improves, then that is likely the issue. There is a big thread at RadioReference where this has been discussed (Missing C1 capacitor might be a keyword for finding it...or poor VHF performance).

We'll fix it at no cost if that is the issue. If that happens not to be the issue, there would be a charge (i.e. if bandpass filter is blown).

End quoted text.

If you bought your 436 less than a year ago, or have sent it in for the repair campaign in the past year, your radio should be good. For older radios with poor VHF and UHF reception, this repair would fix the issue. Nothing was stated on whether Uniden would cover shipping one way, or both ways for this defect.

Still no word on the advertised features that have not been released yet.
Site Admin
Posts: 119
Joined: Thu Aug 30, 2012 11:35 am

Return to Scanners N'at

Who is online

Users browsing this forum: No registered users and 1 guest